Table 2 Distribution of duration based on the darkness-dryness conditions for RMS and angle values of materials
From: The effect of storage conditions and duration on dimensional stability of 3D-printed endoguides
RMS | 7 Days | 14 Days | p value* |
|---|---|---|---|
Mean ± SD | Mean ± SD | ||
Daylight-Dry | 0.044 ± 0.008 | 0.065 ± 0.012 | 0.001 |
Daylight-Wet | 0.069 ± 0.017 | 0.075 ± 0.045 | 0.709 |
Dark-Dry | 0.048 ± 0.006 | 0.052 ± 0.016 | 0.568 |
Dark-Wet | 0.063 ± 0.020 | 0.068 ± 0.024 | 0.451 |
Angle | |||
Daylight-Dry | 0.32 ± 0.13 | 0.31 ± 0.15 | 0.901 |
Daylight-Wet | 0.31 ± 0.11 | 0.39 ± 0.09 | 0.081 |
Dark-Dry | 0.24 ± 0.08 | 0.27 ± 0.10 | 0.146 |
Dark-Wet | 0.32 ± 0.09 | 0.41 ± 0.14 | 0.169 |