Page 4 of 132
Dental anxiety is a pervasive problem worldwide, leading to avoidance of dental care, resulting in oral health problems and impacting daily life through social withdrawal and work absenteeism. Addressing this ...
Orofacial clefts (OFCs) are among the most common congenital anomalies accounting for over 4.6 million cases globally. In many developing nations, OFCs are associated with significant morbidity and a heightene...
Dentin hypersensitivity (DH) causes transient sharp pain from exposed dentinal tubules, adversely affecting oral health and quality of life. This study compared the efficacy of two innovative treatments agains...
Oral diseases are among the most prevalent non-communicable diseases globally. Due to their lifestyle choices and dietary habits, college students often exhibit poor oral health and are at a higher risk of dev...
Obstructive sleep apnea (OSA) is a common disorder characterized by repetitive complete or partial closure of the upper airway during sleep, resulting in sleep fragmentation and oxygen desaturation. Cephalogra...
Oral and maxillofacial space infections (OMSIs) are a serious emergency disease in oral and maxillofacial departments; untreated or undertreated OMSI can lead to serious complications and can be life-threateni...
This study evaluated the effects of air-polishing procedures using sodium bicarbonate, glycine, and erythritol powders on the surface microhardness and roughness of gingiva-colored composites (GCCs).
Edentulism is a devastating condition that is often irreversible and considered a marker of a diseased state of oral health. The prevalence of edentulism globally is 22%, which is quite high. The long-term abs...
Creep of composite restorations is affected by their exposure to oral fluids. This study sought to assess the effect of media (water and 75% ethanol) and time storage on creep and compressive strength of bulk-...
Dens evaginatus is a dental anomaly characterized by a conical cusp or tubercle on the occlusal surface. It is generally believed to be caused by the protrusion of the dental papilla toward the enamel organ du...
As per the recent research findings, there is a significant difference between the bacteriome of normal tissue (NT) and tumor tissues (TT) of oral squamous cell carcinoma (OSCC). Identifying this distinct bact...
Quantifying shared risk factors among periodontal disease (PD), cardiovascular disease (CVD), type 2 diabetes (DM2) can bolster Common Risk Factor Approach (CRFA), enabling integration of PD prevention into no...
The quality of marginal and internal adaptation plays a crucial role in the clinical longevity of pediatric crowns. This study aimed to evaluate the effect of restoration type (3D-printed, milled, and prefabri...
Artificial intelligence (AI) chatbots are increasingly used in healthcare to address patient questions by providing personalized responses. Evaluating their performance is essential to ensure their reliability...
Artificial intelligence (AI) has rapidly advanced in healthcare and dental education, significantly impacting diagnostic processes, treatment planning, and academic training. The aim of this study is to evalua...
Controversial properties and performance of commercially available 3D-printed resin composite for permanent restorations. So, the purpose of this study was to assess the flexural strength, microhardness, wear,...
The edentulous patients with unstable mandibular position (MP) and uncoordinated mandibular movement (MM) usually complain the poor therapeutic effect when conventional complete dentures (CCDs) are delivered. ...
To assess the effect of indirect ultrasonic activation on the root canal obturation with a premixed calcium silicate cement (CSC).
To investigate the impact of high glucose on the senescence of synovial mesenchymal stem cells (SMSCs) and to elucidate the role of mitochondrial dysfunction in this process.
Low antimicrobial activity is a major drawback of three-dimensional (3D) printed denture bases, so the incorporation of antimicrobial nanoparticles possesses an effective antifungal and antibacterial effect. H...
It has been reported that periodontitis was a risk factor for metabolic dysfunction-associated steatotic liver disease (MASLD). The aim of this study is to investigate the impact of periodontitis on all-cause ...
This study aimed to assess the microtensile bond strength of a chlorhexidine-containing dentin bonding agent compared with a standard adhesive, and to investigate its clinical success in Class II cavities in p...
The acquisition of oral hygiene habits during early childhood plays an important role in the prevention of dental caries. Illustrated storybooks can be an effective tool for teaching children oral hygiene beha...
Ni-Ti instruments with varying design features may lead to different levels of postoperative pain, which is a significant clinical concern, particularly in previously asymptomatic teeth. Therefore, the purpose...
To evaluate the influence of guide support on the accuracy of sCAIS using a keyless guiding system in different cases of partial edentulism.
Treatment for Angle’s Class II division 1 involves both extraction and non-extraction orthodontic therapy. Managing Class II division 1 malocclusion accompanied by maxillary anterior tooth impaction and anteri...
Oral ulcers exhibit diverse symptoms and etiologies. The treatment approach varies depending on the size and characteristics of the ulcer, typically starting with topical therapies such as steroid or antifunga...
Mini implant retained overdentures have been treated in edentulous patients with promising long-term results. However, various attachment systems in this process remain insufficiently investigated. This system...
This review aims to analyze the effectiveness of intraoral devices, emphasizing predominant materials, key manufacturing technologies, and their prophylactic role in mitigating complications during radiotherap...
In clear aligner treatment (CAT), closure of the premolar space is achieved by reducing aligner length. Posterior anchorage preparation is effective in preserving molar angulation; however, the resulting dista...
Titanium is commonly used for dental implants due to its high biocompatibility and durability. However, concerns about metal ion release and aesthetic limitations in certain tissue biotypes have driven the sea...
Malocclusion is a prevalent oral health concern worldwide, ranking third after dental caries and periodontal disease. Early identification and intervention in childhood can prevent its progression into adultho...
This study aimed to investigate the efficacy of light-cured fluoride varnishes on artificial erosive lesions.
No consistent approach to the management of direct oral anticoagulants (DOACs) during and after oral surgery has been established. Thus, DOACs may be unnecessarily discontinued, raising the potential risk of l...
For patients missing the maxillary central incisor in childhood, resorption of the alveolar bone in the area of the missing teeth over time can increase the difficulty of performing later prosthodontic treatme...
With the global aging trend, the number of edentulous individuals is steadily increasing. All-on-4 implant restoration can greatly recovery masticatory function in edentulous patients. This study aims to deter...
The interceptive treatment of Class II malocclusion using clear aligners is still debatable. This retrospective study analyzes the short-term occlusal and cephalometric effects in 40 growing patients with Clas...
To explore the incidence and risk factors of open gingival embrasures (OGEs) in the front region of adult none-extraction cases with clear aligner treatment (CAT).
Teledentistry offers an effective, cost-efficient solution for caries detection in school children, improving access to early diagnosis and preventive care in underserved areas. Through remote imaging, it enab...
Residual root canal filling material might inhibit the efficacy of irrigation materials, medicaments and sealers during the endodontic non-surgical retreatment. The aim of this study was to compare the efficac...
Head and neck cancer patients receiving chemotherapy and radiation therapy may experience a notable and frequently sudden decline in their oral health. These alterations include oral mucositis that develops du...
Thermoplastic materials, such as glycol-modified polyethylene terephthalate (PET-G) and thermoplastic polyurethane (TPU), undergo alterations due to environmental factors in the oral cavity, which can affect t...
This study aimed to evaluate the influence of different print orientations and external shell thickness on the accuracy of master casts printed with direct light processing (DLP) technology for fixed dental pr...
Optimal color stability is crucial for patient satisfaction in prosthetic dentistry. This study assessed the impact of coffee immersion on the color stability and translucency of polished and glazed lithium di...
Oral lymphomas are rare and difficult to diagnose, with Mucosa-Associated Lymphoid Tissue (MALT) lymphoma most commonly affecting older adults, particularly women. MALT lymphoma of the lip is exceptionally rar...
The goal of root canal preparation is to eliminate microorganisms and debris from the root canal system, while providing space for the placement of root filling materials. However, the process can lead to the ...
Various inflammatory and anti-inflammatory mediators, along with diverse cell types, are implicated in the development and progression of periapical lesions. This work aimed to assess the immuno-expression of ...
This study aimed to assess the feasibility of quantitative magnetic resonance imaging (MRI) employing the multi-dynamic multi-echo (MDME) technique as a diagnostic modality for evaluating glandular dysfunction...
Early-life adversity (ELA) has been linked to accelerated biological development. This study aimed to explore the cumulative effects of different dimensions of early-life adversity (ELA) on accelerating biolog...
This study evaluates the location and supero-inferior diameter of the posterior superior alveolar canal (PSAC) in adolescent patients with unilateral cleft lip and palate (CLP) using cone-beam computed tomogra...
Citation Impact 2023
Journal Impact Factor: 2.6
5-year Journal Impact Factor: 3.2
Source Normalized Impact per Paper (SNIP): 1.205
SCImago Journal Rank (SJR): 0.737
Speed 2024
Submission to first editorial decision (median days): 15
Submission to acceptance (median days): 118
Usage 2024
Downloads: 5,105,312
Altmetric mentions: 794
The following summary describes the peer review process for this journal:
Identity transparency: Single anonymized
Reviewer interacts with: Editor
Review information published: Review reports. Reviewer Identities reviewer opt in. Author/reviewer communication